1.
Deflate
the boat (remember
to hold the
valve
insert on the Aerotec
inflatable
floor so that it doesn't
fly off).
2.
Replace
the
valve
protections.
3.
Remove
oars and equipment.
4.
Empty
the boat of all water and sand by opening
the self-bailers,
dry it.
5.
Fold
in
the 2 sides of the main buoyancy
tube (A), fold the cones onto the transom,
then
roll up
the boat around the transom
(C). Start again if you feel there is still some air left in the tubes.
r
i!
1\
Stow
the boat in its bag as follows
(D):
· Stow
the boat folded on its bag open (back side of the bag visible).
· Position
the oars dismantled
on top
· Close
the bag and fasten the two front straps.
· Tight
the side ropes (make sure that all equipment
stays inside).
· To finish,
store the foot-pump
in the front pocket.
