BOMANN WT 5022, Instruction Manual, Page: 9 / 16

9
it comes on after each load to remind you to clean the lint filter. If not clean the filter, the machine per-
form well for the next use, but the drying efficiency will be influenced if not clean the filter for many
times.
Program selector switch
Program selector switch Program selector switch
Program selector switch
Turn the program selector switch to the required program. The ‘Start/Pause’ control lamp starts to flash. The
program will be switched off if you have not pressed any button for 10 minutes.
Automatic controlle Automatic controlle Automatic controlle Automatic controlled drying d drying d drying d drying
You can choose different programs base on you different clothes materials. The device has the function with
sensor the moisture in order to automatically adjust the drying time for optimal drying. This drying system is
fitting for cottons, synthetics sections and anti-bacterial, silk programs.
Time controlled drying Time controlled drying Time controlled drying Time controlled drying
Can be use to finish drying-off if necessary. Select the 90 or 60 minute program for cottons, or the 30 minute
program for synthetics. To cancel a running program, turn the program selector to O-position. At the end of
drying, turn the program selector switch to O-position (OFF) to switch the machine off before removing the
laundry.
Additional options Additional options Additional options Additional options
Depending on the program, various functions can be combined. These will be set after program selection and
before pressing the ‘Start/Pause’ button. If these buttons are pressed the corresponding control lamp turns on.
Select the Buzzer Select the Buzzer Select the Buzzer Select the Buzzer
After turning on the appliance, the buzzer is off if you do none operation. The buzzer can be turned on or be
turned off during the process. By pressing the button ‘Summer’, the buzzer (summer) goes off and the corre-
sponding control lamp is lighting. When the buzzer (summer) is working, the signal will sounds in following
cases:
-
When pushing any other button
-
At the end of program cycle