13
•
Check the drum regularly on dirt or fiber residues;
clean the drum and the inside of the door also
with a soft, damp cloth.
•
Dry the appliances thoroughly before taking in
operation again.
Cleaning the
Cleaning the
Cleaning the
Cleaning the lint filter
lint filter
lint filter
lint filter
CAUTION
CAUTION
CAUTION
CAUTION::::
•
Dirty filter affect the drying result. Check and
clean the filter regularly.
•
The appliance must never be operated without
installed filter. Improper insertion of filter may af-
fect the performance and damage the appliance.
The lint filter catches all fibres which accumulate
during drying. Clean the filter before or after each
drying cycle.
•
Remove the filter upwards.
•
Open on the lint filter.
•
Wipe off the lint by hand, if necessary use a damp
cloth or clean the filter under running water.
•
Dry the filter thoroughly and replace if correctly.
Water receiver emptied
Water receiver emptied
Water receiver emptied
Water receiver emptied
Water receiver need to emptied every time after
used.
•
Pull out the water tank.
•
Pour out the water into drain.
•
Push the water tank in dryer.
•
Press the ‘Start/Pause’ button
Cleaning the condenser
Cleaning the condenser
Cleaning the condenser
Cleaning the condenser
Condensor is one of the very important assembly to
realize effective drying. Therefore need special atten-
tion. Suggest you clean the condenser three or four
times in every year.
•
Open condenser cover.
•
Move two pieces of lock rod, pull out the conden-
ser
•
Put the condenser under the tap make water
through completely by clean condenser.
•
According to installation of opposite direction.
Replace the bulb
Replace the bulb
Replace the bulb
Replace the bulb
•
Open the door, put your hand into the drum of a
clothes dryer, use screw driver unscrew two piec-
es of screw and take out lamp screen.
•
Take out the bulb by turning counterclockwise. Be
carefully, do not let the bulb fall off.
•
According to installs new bulb with it is reserve
directions process.
•
Catch the lamp screen by hand and hard push
counterclockwise until bulb has loosened.
Trou
Trou
Trou
Troubleshooting
bleshooting
bleshooting
bleshooting
Before you contact an
Before you contact an
Before you contact an
Before you contact an authorized specialist
authorized specialist
authorized specialist
authorized specialist
Problem
Problem
Problem
Problem
Cause / Action
Cause / Action
Cause / Action
Cause / Action
Appliance does
not work.
-
Check the power supply.
-
Is the appliance switched on?
-
Is a program selected?
-
Consider the maximum loading.
The housing is
hot or there is a
smell of burning.
-
Lint filter is blocked and must be
cleaned.
-
Ventilation openings are blocked.
-
Unusual odours
and powerful
vibrations.
-
The appliance must stand on a
solid base.
-
Are the screw-in feet aligned?
Fabrics are
misshapen.
Always follow the instructions on the
care label of your fabrics.