25
•
In case of damage, do not put the appliance into
operation. Contact your distributor.
NOTE:
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter “Cleaning and Maintenance”.
Appliance Equipment
Appliance Overview
1 Power plug
2 Control panel
3 Drain hose
4 Appliance lid
5 Detergent dispenser
6 Drum
7 Maintenance cover
Delivery scope
1x inlet hose, 1x hose retaining sheet, 4x transport
locking covers
Installation
WARNING:
The unit must not be connected to the mains during
installing. Otherwise there is danger to life or electric
shock hazard!
CAUTION:
For a correct operation the appliance must be con-
nected properly. The specifications for water supply
and drain as well as the electrical connection must
fulfill the required criteria.
Remove the transport locking screws
CAUTION:
•
Before using, all transport locking screws must be
removed from the appliance back. Otherwise it
may cause serious damages.
•
Keep the transport locking screws for later use /
transport. Never transport the appliance without
properly attached transportation safety!
Remove the transport locking screws with a wrench.
Insert the supplied transport locking covers.
Installation location
•
The site should be located near the water inlet
and outlet, as well as near a properly grounded
power socket.
•
Good ventilation around the appliance is required,
in order to dissipate the heat properly. Enough
clearance must be created for this purpose.
•
The free space above the device should be crea-
ted so that the unit lid can be opened without
hindrance.
•
Make sure that the floor on which the appliance is
installed, is even, heat-resistant and clean.
•
Take care of a solid and horizontal position of the
appliance. If the appliance is not horizontally lev-
eled, adjust the feet accordingly (see “Adjust the
feet”).
•
Power cord and water hoses may not kinked or
squashed.
•
The wall socket must be freely accessible.
•
Avoid the installation:
-
near heaters, next to a stove, direct sunlight or
any other heat sources;
Summary of Contents for WA 7160 TL
Page 38: ...38...
Page 39: ...39...
Page 40: ...40 C Bomann GmbH www bomann germany de Made in P R C Stand 10 2020...