9
Notes on inlet hose safety system (
Notes on inlet hose safety system (
Notes on inlet hose safety system (
Notes on inlet hose safety system (delivery scope depending on model
delivery scope depending on model
delivery scope depending on model
delivery scope depending on model
The safety system consists of a double-walled inlet hose. It guarantees to cut off the
water supply when leakage of the inner hose. Switching off the water supply leads over
an electronic contact.
If necessary, you can order an inlet hose safety system from your dealer or in our online
accessories shop,
www.bomann-germarny.de
. To order, use the reference number
found under “Technical Data”.
Connect the water inlet hose (cold water connection)
Connect the water inlet hose (cold water connection)
Connect the water inlet hose (cold water connection)
Connect the water inlet hose (cold water connection)
NOTE
NOTE
NOTE
NOTE::::
The water pressure must be between 0.03 MPa and 1.0 MPa. With higher
use a pressure regulator.
•
Check the tightness of the rubber seals (d) at both ends of the inlet
hose to prevent leakage.
•
Connect the water inlet hose to a water thread with ¾“.
hose firmly in the direction of the screw thread; pay attention for a
tight fit.
•
Connect the other end of the inlet hose to the inlet valve on the
appliance back; pay attention for a tight fit too.
Connect the water drain hose
Connect the water drain hose
Connect the water drain hose
Connect the water drain hose
NOTE
NOTE
NOTE
NOTE::::
The drain hose has a length of approx. 1.5 m and can extend with a suitable hose and
connecting piece to a length of max. 4 m.
CAUTION:
CAUTION:
CAUTION:
CAUTION:
In order to prevent backflow of contaminated water, the free end of the hose must not
come under the water level of the drain.
•
Connect the drain hose to a drain pipe with a minimum diameter of 40 mm; altern
tively the drain hose can be fixed to a sink or directly to the drainage.
delivery scope depending on model
delivery scope depending on model
delivery scope depending on model
delivery scope depending on model))))
guarantees to cut off the
water supply when leakage of the inner hose. Switching off the water supply leads over
dealer or in our online
. To order, use the reference number
MPa. With higher pressure:
Check the tightness of the rubber seals (d) at both ends of the inlet
Connect the water inlet hose to a water thread with ¾“. Screw the
hose firmly in the direction of the screw thread; pay attention for a
Connect the other end of the inlet hose to the inlet valve on the
The drain hose has a length of approx. 1.5 m and can extend with a suitable hose and
the hose must not
Connect the drain hose to a drain pipe with a minimum diameter of 40 mm; alterna-
tively the drain hose can be fixed to a sink or directly to the drainage.
