BOMANN TSG 7402.1, Instruction Manual

Page: 77 / 124

77
Problem Possible cause / Action
Cloudiness
glassware
Use less detergent if you have soft
water and select a shortest cycle to
rinse and clean glassware.
Black or
grey marks
Aluminum utensils have rubbed
against dishware. Use a mild abra-
sive cleaner to eliminate those
marks.
Stains on
inner sur-
face
Only use detergents without color-
ants.
White film
on inside
surface
Hard water minerals: clean the
interior by using a damp sponge
with dishwasher detergent. Wear
rubber gloves.
Unsatisfac-
tory drying
result
∙ Improper loading ∙ dishes are
removed too soon ∙ wrong program
has been selected ∙ use of cutlery
with a low-quality coating
Error codes
For some malfunctions, flashing control lamps will
show the following error codes to warn you:
Code Meaning / possible cause
E1
Water inlet fault! Faucet not open, inlet
blocked or water pressure too low.
E3 Malfunction of heating element.
E4 Overflow / water leakage!
Ed
Communication error / display malfunc-
tion!
CAUTION:

If overflow occurs, turn off the main water sup-
ply before calling an authorized technician.

If there is water in the lower housing part due to
an overfilling or a small leak, remove this water
before restarting the appliance.
NOTE:
If a problem persists after following the steps
above, please contact your distributor or an au-
thorized technician.
Technical Data
Electrical connection / Water supply………………..
Connection voltage: …..……....220-240 V~ / 50 Hz
Connection power: ………...………….730 – 860 W
Water pressure: ……………...…..……0.04 – 1 Mpa
Dimension H x W x D / Weight………………………
Unit size: ……………….....…43.5 x 42.0 x 43.5 cm
Net weight: ………..………....………......ca. 13.5 kg
Available accessory…………………………………..
Inlet hose safety system: ……….Art.-No. 8900 410
For more information about the product, scan the
QR code on the supplied energy label and/or visit
the official website of the product data bank:
https://eprel.ec.europa.eu
The right to make technical and design modifica-
tions during continuous product development re-
mains reserved.
This appliance has been tested according to all
relevant current CE guidelines, such as electro-
magnetic compatibility and low voltage directives,
and has been constructed in accordance with the
latest safety regulations.