47
2. Use the rotary button to set the weight or the desired time.
3. Select the second function: Press the MICRO./GRILL/
COMBI. button once. Then use the rotary button to select the
desired power level (P10 to P100).
4. Press the MICRO./GRILL/COMBI. button to confirm your set-
tings.
5. Use the turning knob to set the desired cooking time between
5 seconds and 95 minutes.
6. Select the third function: Press the MICRO./GRILL/COMBI.
button once. Then use the rotary button to select the mode (G).
7. Press the MICRO./GRILL/COMBI. button to confirm your set-
tings.
8. Use the turning knob to set the desired cooking time between
5 seconds and 95 minutes.
9. Press the QUICK START/START button to start operation.
NOTE:
• The change of program is indicated by an acoustic signal.
• When half of the grilling time has passed two acoustic
signals are heard to remind you to turn the food over. If the
door remains closed, the appliance starts again after ap-
proximately 60 seconds. If you would like the appliance to
continue operation sooner, press the QUICK START/START
button.
WARNING:
Open and close the door at its handle only. Risk of burns!
After the time has elapsed the device will turn off and 5 signal
tones will sound. Take the food from the device.
Special functions
Auto start
You can start all of the programs or even a combined setting in
several steps with a delay. The maximum time-delay is 23 hours
and 59 minutes.
NOTE:
First set the clock! Otherwise you may not use this function.
Example: Proceed as follows for automatically starting the micro-
wave:
1. Press the MICRO./GRILL/COMBI. button once. Then use the
rotary button to select the desired power level (P10 to P100).
2. Press the MICRO./GRILL/COMBI. button to confirm your set-
tings.
3. Use the turning knob to set the desired cooking time between
5 seconds and 95 minutes.
4. Press the CLOCK/PRE-SET button. A signal tone sounds
and the display will show the current time, with the first digit
flashing.
5. Use the turning knob to set the hour of the desired start time.
6. Press the CLOCK/PRE-SET button. A signal tone sounds and
the minutes will be flashing on the display.
7. Use the turning knob to set the minutes of the desired start
time.
8. Press the QUICK START/START button to confirm. The
“clock” symbol flashes in the display.
Example: 7:30 minutes cooking time at 80% power; start time
14:20 o’clock
Step Button/Rotary button Display
1a MICRO./GRILL/COMBI. P100
(Selection)
1b
P80
(Power setting)
2
MICRO./GRILL/COMBI. P80
(Confirmation)
3
7:30
(Cooking time)
4
CLOCK/PRE-SET
10:45
(Current time)
5
14:45
(Set hour)
6
CLOCK/PRE-SET
14:45
7
14:20
(Set minutes)
8
QUICK START/START 10:45
(Current time)
NOTE:
• During this programmed setting the functions of the controls
are blocked (except: CLOCK/PRE-SET and CANCEL/
STOP).
• If you wish to display the start time again, press the CLOCK/
PRE-SET button.
• When the pre-set time has been reached, the microwave
will start operation. Two signal tones will indicate the start.
WARNING: RISK OF FIRE!
• Always supervise the device during operation.
• When using the time-delay function, set the time in such a
way that the device will be operating under proper supervi-
sion.
• Do not operate the microwave empty.
• If you take the food earlier from the device, you will have to
terminate the function by pressing the CANCEL/STOP button.
After the time has elapsed the device will turn off and 5 signal
tones will sound. Take the food from the device.
Locking (Child-proof lock)
Press and hold the CANCEL/STOP button for more than 3 sec-
onds to lock the device. The display will show the locked setting.
The functions of the controls are blocked. Press and hold the
CANCEL/STOP button again for more than 3 seconds to unlock.
Display function
• During microwave, grilling or combined operation you can
press the MICRO./GRILL/COMBI. button in
order to show the current power level.
• In disregard to the operation mode, the display will be show-
ing the current time for 4 seconds when pressing the
CLOCK/PRE-SET button.
• During time-delay mode, press the CLOCK/PRE-SET button
to display the start time.
Cleaning
WARNING:
Turn the microwave off and remove the mains plug.