BOMANN KSG 7280, Instruction Manual Instruction Manual

Page: 16 / 24

16
Reversing the door opening
Reversing the door opening Reversing the door opening
Reversing the door opening
If required, the door opening can be moved from the
right (supplied condition) to the left side.
WARNING: WARNING: WARNING: WARNING:
When replacing the door stop, the appliance must be
disconnected from the power supply first.
NOTE NOTE NOTE NOTE::::
•
Ask another person to assist.
•
You possibly need:
screw wrench, Phillips screw-
driver as well as a thin-blade screwdriver.
•
Loosen the screws (1) on the appliance back.
Remove the cover caps (2), loosen the screws
underneath and remove the appliance cover.
•
Dismount the upper door hinge (3) and lift up the
appliance door.
•
Dismount the door stopper (4) on the underside of
the door and attach the enclosed door stopper on
the opposite side. Set the appliance door safely
aside.
NOTE NOTE NOTE NOTE::::
Keep the removed door stopper for a further
possible change of the door opening.
•
Tilt the appliance slightly backwards and block it
in this position. Unscrew the feet (5) and (6).
Disassemble the lower door hinge (7).
•
Transfer and attach the lower door hinge (7) to
the opposite appliance side. Screw in the feet (6)
and (5) accordingly.
•
Put the appliance back in the upright position.
Put on the appliance door and fix it in the
intended position.
•
Transfer and attach the upper door hinge (3) to
the opposite appliance side.
•
Fasten the appliance cover and replace the cover
caps (2).
Check that the door is optimally aligned both
vertically and horizontally to ensure a smooth
opening and closing of the door.
Startup / Operation Startup / Operation Startup / Operation Startup / Operation
Prior to first use
Prior to first use Prior to first use
Prior to first use
CAUTION
CAUTION CAUTION
CAUTION::::
After transport, the appliance should be left standing
upright for about four hours before connecting to the
power supply. Nonobservance could lead to malfunc-
tion of the cooling system and causes an appliance
breakdown.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter “Cleaning and Maintenance”.
Starting the appliance Starting the appliance Starting the appliance Starting the appliance
•
Connect the appliance to the power supply.
•
Operate the temperature control. See also the
section "Settings".
Settings Settings Settings Settings
The power levels [ MIN–MAX ] regulate the different
values of the internal temperature.