BOMANN KSG 7280, Instruction Manual Instruction Manual

Page: 14 / 24

14
W W W WARNING: ARNING: ARNING: ARNING:
•
Do not use mechanical devices or other means to accelerate the de-
frosting process (if necessary), except those described in this manual
(depending on the model included the scope of delivery).
•
Do not damage the refrigerant circuit.
•
Do not operate any electrical devices inside the appliance.
•
Do not store explosive substances such as aerosol containers with
flammable propellant in the appliance.
•
Do not try to repair the appliance on your own. Always contact an au-
thorized technician. To avoid the exposure to danger, always have
faulty cable be replaced only by the manufacturer, by our customer
service or by qualified person and with a cable of the same type.
•
Use the provided collection points of electrical equipment for the dis-
posal of the appliance.
Coolant
Coolant Coolant
Coolant
WAR
WAR WAR
WARNING
NING NING
NING::::
The coolant circuit of this appliance contains the
refrigerant Isobutane (R600a), a natural gas that is
flammable and of high environmental compatibility.
Make sure no parts of the coolant circuit get dam-
aged during transport and installation of the appli-
ance.
If the coolant circuit is damaged: If the coolant circuit is damaged: If the coolant circuit is damaged: If the coolant circuit is damaged:
•
avoid any open flames or ignition source,
•
disconnect the plug,
•
thoroughly air the room in which the appliance is
installed and
•
contact an authorized technician.
Transport
Transport Transport
Transport and Packaging
and Packaging and Packaging
and Packaging
Transp Transp Transp Transport the appliance ort the appliance ort the appliance ort the appliance
Transport the appliance, if possible, only in vertical
position. Otherwise, it is absolutely necessary to
allow the appliance standing upright for a few hours
before installation ”Prior to first use”. Protect the ap-
pliance during transport against weather influences.
NOTE NOTE NOTE NOTE::::
The appliance has wheels which facilitate the
transport and installation of the appliance. Tilt the
appliance back slightly and move it gently.
Unpack
Unpack Unpack
Unpacking
ing ing
ing the appliance
the appliance the appliance
the appliance
•
Remove the appliance from its packaging.
•
Remove all packaging material, such as foils, filler
and cardboard packaging.