BOMANN KSE 337, Manual

Page: 18 / 28

18
Unpacking the Appliance
Unpacking the Appliance Unpacking the Appliance
Unpacking the Appliance
•
Remove the appliance from its packaging.
•
Remove all packaging material, such as foils, filler
and cardboard packaging.
•
To prevent hazards, check the appliance for any
transport damage.
•
In case of damage, do not put the appliance into
operation. Contact your distributor.
CAUTION:
CAUTION: CAUTION:
CAUTION:
Pull off the protective foil from the appliance sides.
NOTE NOTE NOTE NOTE::::
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter “Cleaning and Maintenance”.
Appliance
Appliance Appliance
Appliance Equipment
Equipment Equipment
Equipment
Appliance overview
Appliance overview Appliance overview
Appliance overview
1111 4-Star freezer com-
partment
2222 Temperature control /
interior light
3333 Door storage racks
4444 Height-adjustable
glass shelves
5555 Vegetable boxes with
glass shelf
Delivery scope
Delivery scope Delivery scope
Delivery scope
3 x height-adjustable glass shelf, 2 x vegetable box
with glass cover, 4 x door storage rack (incl. cheese-/
butter case and metal rod for bottle holder), 2 x egg
tray, 1 x ice-cube tray, installation material
Installation
Installation Installation
Installation
Condition Condition Condition Conditions for the installation location s for the installation location s for the installation location s for the installation location
•
Good ventilation is required around the appliance,
in order to dissipate the heat properly and to
guarantee efficient cooling operation at low power
consumption. Sufficient clearance is necessary.
-
Refer to the instructions which we give you in
“Built-in”;
-
Place the appliance so that the appliance door
can open without being impeded.
•
Only install at a location with an ambient tempera-
ture suitable for the climate class of the appliance.
For information on the climate class, please refer
to chapter “Technical Data” or to the rating label
located in the interior or on the rear side of the
appliance.
•
Look for stable, horizontal appliance position.
•
Avoid the installation: Avoid the installation: Avoid the installation: Avoid the installation:
-
near heaters, next to a stove, direct sunlight or
any other heat sources;
-
at locations with high humidity (e.g. outdoors,
bathroom), as metal parts would be suscepti-
ble to corrosion under such circumstances;
-
near volatile or flammable materials (e.g. gas,
fuel, alcohol, paint, etc.), in rooms which may
have poor air circulation (e.g. garages).
-
Do not expose the appliance any weather.
Electrical connection
Electrical connection Electrical connection
Electrical connection
WARNING:
WARNING: WARNING:
WARNING:
•
The installation to the mains supply must conform
to the local standards and regulations.
•
Improper connection may cause to an electric electric electric electric
shock shock shock shock!
•
Do not modify the appliance plug. If the plug does
not fit properly to the outlet, let install a proper
outlet by an authorized specialist.
•
The accessibility of the power plug must be en-
sured to disconnect the appliance from the power
supply in case of emergency.