19
Unpacking the appliance
Remove the appliance from its packaging.
Remove all packaging material, such as foils, filler
and cardboard packaging.
To prevent hazards, check the appliance for any
transport damage.
In case of damage, do not put the appliance into
operation. Contact your distributor.
NOTE:
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter “Cleaning and Maintenance”.
Appliance Equipment
Appliance overview
1 Interior light
2 Glass shelves
3 Door storage racks
4 Fresh box
5 Fruit/Vegetable box
6 Freezing trays
7 Freezing drawers
Delivery scope
3x glass shelf, 1x fresh box, 1x fruit/vegetable box,
6x door storage rack, 1x egg tray, 2x freezing tray, 4x
freezing drawer, 1x ice-cube tray, incl. installation
material (washers, rubber blocks)
Installation
WARNING:
Keep the installation material out of the reach of
children so that small parts cannot be swallowed!
Conditions for the installation location
Good ventilation is required around the appliance
to dissipate the heat properly and to guarantee ef-
ficient cooling operation at low power consump-
tion. Enough clearance is necessary.
-
Gap to the back approx. 50～70 mm, to the
side walls and above the device each approx.
min. 100 mm;
-
Place the appliance so that the appliance door
can open without being impeded.
Only install at a location with an ambient tempera-
ture suitable for the climate class of the appliance.
The climate class can be found under "Technical
Data" and on the rating label located in the interior
or on the appliance rear.
Place the appliance on a steady and safe surface.
If the appliance is not horizontally leveled, adjust
the feet accordingly (see “Levelling the appli-
ance”).
