6
•
Consider the necessary installation dimensions (see “Installation steps”).
•
Take care of a solid and horizontal position of the appliance. If the appliance is not horizontally leveled,
adjust the feet accordingly.
•
Power cable and water hoses may not kinked or squashed.
•
Avoid the installation:
Avoid the installation:
Avoid the installation:
Avoid the installation:
-
near heaters, next to a stove, direct sunlight or any other heat sources;
-
at locations with high humidity (e.g. outdoors), as metal parts would be susceptible to corrosion under
such circumstances;
-
in rooms where the temperature could drop below freezing. Do not expose the appliance any weather.
-
near volatile or flammable materials (e.g. gas, fuel, alcohol, paint, etc.).
Installation steps
Installation steps
Installation steps
Installation steps
Attach the condensation strip
Attach the condensation strip
Attach the condensation strip
Attach the condensation strip
Attach the strip under the wooden worktop to prevent it from damages of ascending water vapor.
•
First clean and dry the concerned area of the worktop thoroughly.
•
Remove the protective foil from the condensation strip and stick it flush
with the worktop edge.
Cabinet opening and appliance d
Cabinet opening and appliance d
Cabinet opening and appliance d
Cabinet opening and appliance diiiimension
mension
mension
mension
Prepare the cabinet opening according to the dimensional drawing.
Unit: mm
If the appliance is installed at the corner of the cabinet, there must remain enough space to
open the door.
1 Kitchen furniture 2 Dishwasher 3 Appliance door
Unit: mm
Dimension and preparation of
Dimension and preparation of
Dimension and preparation of
Dimension and preparation of the decoration panel
the decoration panel
the decoration panel
the decoration panel
Prepare the wooden decorative panel according to the dimen-
sional drawing.
•
Align the drilling template and mark the necessary holes.
Check this with a spirit level.
•
Drill holes of Ø 2 mm and 8 mm depth at the pre-marked
positions in the panel.
Unit: mm