BOMANN GSPE 872, Instruction Manual, Page: 10 / 24

10
•
By pressing the buttons <<<< or >>>>, the water hardness can be changed accordingly. The display shows the
setting: [H1->H2->H3->H4->H5->H6]
•
Finish the setup via the OK button. The water hardness is automatically saved.
The following settings (benchmarks) are recommended:
Water hardness Water hardness Water hardness Water hardness
Display indication
Display indication Display indication
Display indication
Sal Sal Sal Salt consumption t consumption t consumption t consumption
(gramm/cycle (gramm/cycle (gramm/cycle (gramm/cycle)))) °dH
°dH °dH
°dH**** °fH
°fH °fH
°fH**** °Clark
°Clark °Clark
°Clark**** mmol/l
mmol/l mmol/l
mmol/l
0 - 5 0 - 9 0 - 6 0 - 0.94 H1 0
6 - 11 10 - 20 7 - 14 1.0 - 2.0 H2 9
12 - 17 21 - 30 15 - 21 2.1 – 3.0 H3 (factory setting) 12
18 - 22 31 - 40 22 - 28 3.1 – 4.0 H4 20
23 - 34 41 - 60 29 - 42 4.1 – 6.0 H5 30
35 - 55 61 - 98 43 - 69 6.1 – 9.8 H6 60
NOTE
NOTE NOTE
NOTE:::: *°dH: German degree / °fH: French degree / °Clark: British degree
Fill in the salt
Fill in the salt Fill in the salt
Fill in the salt
CAUTION:
CAUTION: CAUTION:
CAUTION:
•
Only refill the salt container when the corresponding message lights up in the display.
•
During filling the salt container, salt and water can escape. Start a program immediately after you have
filled the container to prevent corrosion.
•
Remove the lower basket and unscrew the lid of the salt container.
•
Add about 1.5 kg of salt by using the supplied funnel tube.
•
Full fill the salt container with water (just before the first use).
•
Screw the lid firmly on again after filling the container.
•
Depending on salt resolution, the message in the display disappears usually immediately after filling.
B BB B. . . .
Fill the rinse aid dispenser
Fill the rinse aid dispenser Fill the rinse aid dispenser
Fill the rinse aid dispenser
Function of rinse aid Function of rinse aid Function of rinse aid Function of rinse aid
The rinse aid is automatically added during the final rinse, ensuring thorough rinsing and a spot and streak
free drying.
When to refill the rinse aid dispenser
When to refill the rinse aid dispenser When to refill the rinse aid dispenser
When to refill the rinse aid dispenser
As long as the corresponding message does not light up in the display, you can estimate
the amount of remaining rinse aid to the optical level indicator "C
C C
C" next to the dispenser.
When the rinse aid dispenser is full, the indicator is completely dark. If the rinse aid diminishes, the size of
the black dot changes as shown below. In order to avoid spotting, the rinse aid level must not drop below ¼.
full ¾ full ½ full ¼ full – refill empty