BOMANN GSP 857 IX, Instruction Manual

Page: 13 / 20

13
Pr Pr Pr Proooogram gram gram gram Program selection Program selection Program selection Program selection informat informat informat informatiiiion on on on Program sequence Program sequence Program sequence Program sequence
Detergent Detergent Detergent Detergent
pre/main (g) pre/main (g) pre/main (g) pre/main (g)
Time Time Time Time
(Min.) (Min.) (Min.) (Min.)
Ene Ene Ene Enerrrrgy gy gy gy
(kWh) (kWh) (kWh) (kWh)
Water Water Water Water
(l) (l) (l) (l)
90 Min.
for lightly soiled dishes
Main rinse (65°C)
Rinse
Rinse (65°C)
Drying
30
(or Tab)
90 1.35 12.5
Rapid
rapid rinse cycle for lightly
soiled dishes without drying
Main rinse (45°C)
Rinse
Rinse (55°C)
20 40 0.75 11.5
NOTE NOTE NOTE NOTE::::
*EN 50242: this program is the test program and of combined energy and water consumption most efficient.
The information for comparability:
Capacity: 12 settings; Position of the upper basket: lower position; rinse aid setting: 6
Control Control Control Control panel panel panel panel
1111 Power: button to turn on/off the power supply.
2222 Program: button to select the rinse program.
3333 Delay: button to select the start delay of 3, 6,
or 9 hours. Close the door and the appliance
starts automatically after the selected time delay
has expired.
4444 The control lamps indicate the program selection.
5555 The control lamps indicate the start delay
selection.
6666 Control lamp: lights up when rinse aid must be
added.
Control lamp: lights up, when dishwasher salt
needs refilling.
Starting a pr
Starting a pr Starting a pr
Starting a program
ogram ogram
ogram
•
The water supply must be opened up to the max-
imum pressure.
•
Load the dishwasher baskets.
•
Fill in the detergent.
•
Turn on the appliance.
•
Set the required program options.
•
Start the operation by closing the appliance door.
Changing the program
Changing the program Changing the program
Changing the program
CAUTIO
CAUTIO CAUTIO
CAUTION:
N: N:
N:
A program change should be done only a short time
after starting the program. Otherwise, maybe deter-
gent has been released and already drained rinse
water.
•
To make a program change, carefully open the
appliance door so that you can operate the control
panel.
•
Press the Program selection button for more than
3 seconds.
•
Select a new program and close the appliance
door.
Forgot to add a dish?
Forgot to add a dish? Forgot to add a dish?
Forgot to add a dish?
WARNING: WARNING: WARNING: WARNING:
Open the door very carefully during operation, there
is a risk of water squirting out.
Dishware can be added any time before the deter-
gent dispenser opens.