6
•
Take care of a solid and horizontal position of the appliance. If the appliance is not horizontally leveled,
adjust the feet accordingly.
•
Power cable and water hoses may not kinked or squashed.
•
Avoid the installation:
Avoid the installation:
Avoid the installation:
Avoid the installation:
-
near heaters, next to a stove, direct sunlight or any other heat sources;
-
at locations with high humidity (e.g. outdoors), as metal parts would be susceptible to corrosion under
such circumstances;
-
in rooms where the temperature could drop below freezing. Do not expose the appliance any weather.
-
near volatile or flammable materials (e.g. gas, fuel, alcohol, paint, etc.).
Water connection
Water connection
Water connection
Water connection
CAUTION:
CAUTION:
CAUTION:
CAUTION:
•
The Installation of the water supply must conform to the local laws and regulations.
•
The appliance is not suitable for hot water supply.
•
Use the new supplied hose set to connect the appliance to the water supply. Do not reuse old or used
connection sets.
•
If the water pipe is new or long time not used, ensure before connecting to the water system, that the water
is clear and free from contamination.
Notes on inlet hose safety system (not included in delivery)
Notes on inlet hose safety system (not included in delivery)
Notes on inlet hose safety system (not included in delivery)
Notes on inlet hose safety system (not included in delivery)
The safety system consists of a double-walled inlet hose. This system guarantees to cut off the water supply
when leakage of the inner hose. Switching off the water supply leads over an electronic contact.
If necessary, you can order an inlet hose safety system from your dealer or in our online accessories shop,
www.bomann.de
www.bomann.de
www.bomann.de
www.bomann.de
. To order, use the reference number found under “Technical Data”.
Connect the water
Connect the water
Connect the water
Connect the water inlet
inlet
inlet
inlet hose (cold water connection)
hose (cold water connection)
hose (cold water connection)
hose (cold water connection)
NOTE
NOTE
NOTE
NOTE::::
The water pressure must be between 0.04 and 1 MPa. With higher pressure: use a pressure regulator.
•
Connect the water inlet hose to a water thread with ¾“. Screw the hose firmly in the direc-
tion of the screw thread; pay attention for a tight fit.
•
Connect the other end of the inlet hose to the inlet valve on the appliance back; pay atten-
tion for a tight fit too.
Connect the water drain hose
Connect the water drain hose
Connect the water drain hose
Connect the water drain hose
NOTE
NOTE
NOTE
NOTE::::
The drain hose has a length of approx. 1.5 m and can extend with a suitable hose and connecting piece to a
length of max. 4 m.
CAUTION
CAUTION
CAUTION
CAUTION::::
In order to prevent backflow of contaminated water, the free end of the hose must not come under the water
level of the drain.
Ремонт
посудомоечных
машин
https://rembitteh.ru
+7(495) 215-14-41
+7 (903) 722-17-03
https://rembitteh.ru