14
program control lamp is lighting: operation
program control lamp is flashing: pause
6666
To activate and deactivate the childproof lock, press this button combination for a few seconds.
7777
The program control lamps indicate the selection of the rinse program.
8888
Warning lamp for salt shortage is lighting once the container needs to be refilled.
9999
Warning lamp for rinse aid shortage is lighting once the container needs to be refilled.
10
10
10
10
The control lamp indicates the activation of the 3in1-function.
11
11
11
11
The control lamp indicates the activation of the childproof lock.
12
12
12
12
The control lamp is lighting when the appliance is in the rinse cycle.
13
13
13
13
The control lamp is lighting when the appliance is in the drying phase.
14
14
14
14
About the Display the salt consumption and the preset time will be selected.
The start delay (if activated), the remaining time and possibly error codes are displayed.
Starting a
Starting a
Starting a
Starting a rinse
rinse
rinse
rinse program
program
program
program
•
The water supply must be opened up to the maximum pressure.
•
Load the dishwasher baskets.
•
Fill in the detergent.
•
Press the power [EIN/AUS] button to switch on the appliance.
•
Select the desired rinse cycle.
•
Set the available options, if required.
•
Press the [START/PAUSE] button and the dishwasher starts.
Program change
Program change
Program change
Program change
CAUTION:
CAUTION:
CAUTION:
CAUTION:
A program change should be done only a short time after starting the program. Otherwise, maybe detergent
has been released and already drained rinse water.
•
To cancel the running program, the appliance must be switched off and on again by using the power
[EIN/AUS] button.
•
Select the desired program and press the [START/PAUSE] button to start the new operation.
Forgot to add a dish?
Forgot to add a dish?
Forgot to add a dish?
Forgot to add a dish?
WARNING:
WARNING:
WARNING:
WARNING:
Open the door very carefully during operation, there is a risk of water squirting out.
Dishware can be added any time before the detergent dispenser opens.
•
Press the [START/PAUSE] button to stop the operation.
•
Once the spray arms stopped working, you can open the door completely.
•
Add forgotten dishware and close the appliance door.
•
Press the [START/PAUSE] button, after approx. 10 seconds the operation will be continued.
Ремонт
посудомоечных
машин
https://rembitteh.ru
+7(495) 215-14-41
+7 (903) 722-17-03
https://rembitteh.ru
