BOMANN GSP 7401, Instruction Manual

Page: 8 / 20

8
CAUTION:
CAUTION: CAUTION:
CAUTION:
•
Use only salt, rinse aid and detergent for dish-
washers. Other products may damage the unit.
•
Always consider the dosage and storage recom-
mendations on the sales packaging.
WARNING:
WARNING: WARNING:
WARNING:
Keep salt, rinse aid and detergent out of reach for
children.
A. Filling salt into the salt container (wate A. Filling salt into the salt container (wate A. Filling salt into the salt container (wate A. Filling salt into the salt container (water softener) r softener) r softener) r softener)
Water softener Water softener Water softener Water softener
The water hardness varies regionally. If hard water is
used in the dishwasher, deposits form on the dishes
and kitchen utensils. The appliance is equipped with
a water softener, that removes lime and minerals
from the water by using water softening in the salt
container. Your local water authority can advise you
on the hardness of the water in your area.
Adjusting the salt consumption Adjusting the salt consumption Adjusting the salt consumption Adjusting the salt consumption
The salt consumption can be adjusted according to
your water hardness therefore optimally regulated.
•
Turn on the appliance.
•
Press the Start/Pause button for more than
5 seconds, the setting mode is now activated for
approx. 60 seconds.
•
By repeatedly pressing the Start/Pause button,
the water hardness can be selected: H1->H2->H3
->H4->H5->H6. The program control lamps indi-
cate the selection (see below table).
•
The setting is automatically saved after a few
seconds; alternatively end the setup with the
Power button.
Water hardness
Water hardness Water hardness
Water hardness
Setting Setting Setting Setting → →→ →
Control lamps Control lamps Control lamps Control lamps flicker flicker flicker flicker
Sa Sa Sa Salt cons. lt cons. lt cons. lt cons.
//// cycle cycle cycle cycle °dH °dH °dH °dH Mmol/l Mmol/l Mmol/l Mmol/l
0-5 0-0.94 H1 → Rapid 0 g
6-11 1.0-2.0 H2 → 90 Min. 9 g
12-17 2.1-3.0 H3 → 90 Min. + Rapid 12 g
18-22 3.1-4.0 H4 → Eco 20 g
23-34 4.1-6.0 H5 → Eco + Rapid 30 g
35-55 6.1-9.8 H6 → Eco + 90 Min. 60 g
NOTE
NOTE NOTE
NOTE::::
°dH: German degree of hardness
Factory setting: H3
Fill in the salt Fill in the salt Fill in the salt Fill in the salt
CAUTION: CAUTION: CAUTION: CAUTION:
•
Only refill the salt container when the salt warning
lamp is lighting.
•
During filling the salt container, salt and water can
escape. Start a program immediately after you
have filled the container to prevent corrosion.
•
Remove the lower basket and unscrew the lid of
the salt container.
•
Add about 1.5 kg of salt by using the supplied
funnel tube.
•
Full fill the salt container with water (just before
the first use).
•
Screw the lid firmly on again after filling the con-
tainer.
•
Depending on salt resolution, the warning lamp
usually disappears immediately after filling.
B BB B. . . .
Fill the rinse aid dispenser
Fill the rinse aid dispenser Fill the rinse aid dispenser
Fill the rinse aid dispenser
Function of rinse aid
Function of rinse aid Function of rinse aid
Function of rinse aid
The rinse aid is automatically added during the final
rinse, ensuring thorough rinsing and a spot and
streak free drying.
When to refill the rinse aid dispenser When to refill the rinse aid dispenser When to refill the rinse aid dispenser When to refill the rinse aid dispenser
If the corresponding message
does not light up in the display,
you can estimate the
amount of remaining rinse aid to the optical level
indicator (D
D D D) next to the dispenser.
When the rinse aid dispenser is full, the indicator is
completely dark. If the rinse aid diminishes, the size