26
•
Move the door to appropriate position, adjust
part 1 and the door, move the connecting wire 2
in the slot of the door from right to left, and then
fix part 1 and wire 2 by screws 3.
•
Connect the electrical connector 1 in accord-
ance with step 3 and then install part 2.
•
Reverse part 1 by 180 °C and install it onto the
right corner of the door, then mount part 2 (both
of which are taken down in step 2).
•
Take the reed switch out of the coping block
(part 3 in step 3) and mount it on another block
for use (which is with mark „R“ in the plastic
bag). Put the coping block just removed back to
the plastic bag.
•
Install part 1, connect the wire connector 2, and
then install part 3.
•
Open the door, mount door racks and then
close it.
Startup / Operation
Startup / Operation
Startup / Operation
Startup / Operation
Prior to first use
Prior to first use
Prior to first use
Prior to first use
CAUTION:
CAUTION:
CAUTION:
CAUTION:
After transport, the appliance should be left standing upright for about 4 hours before connecting to the power
supply. Nonobservance could lead to malfunction of the cooling system and causes an appliance breakdown.
Clean the interior of the appliance including all accessory parts located inside. Consider the instructions which
we provide in the chapter “Cleaning”.
Summary of Contents for GS 3184
Page 35: ...35 ...
