BOMANN EHBC 7930, Instruction Manual

Page: 18 / 24

18
Troubleshooting
Before you contact an authorized specialist
Problem Possible cause / Action
Unit does not
work Check the power supply.
Oven lamp
does not work
Bulb is defective, was inserted incor-
rectly, is not securely seated in the
socket, see
“Reverse the bulb”.
Strong smoke
development
Grease residues in the oven cham-
ber, switch off the oven, allow to
cool before cleaning.
Di
sp
la
y
co
de
E1
Sensor error
C
al
l s
pe
ci
al
is
t
E2 Heating error
NOTE:
If a problem persists after following the steps above,
contact your distributor or an authorized technician.
Technical Data
Electrical connection…………………………...………..
Connection voltage: 220-240/380-420V 3N~ 50/60Hz
Connection power: ………………..….…........8.600 W
Fuse protection: ………………...………......…3 x 16 A
Protection class: ………………………...………I / IP20
Dimension H x W x D / Weight……...……..…………..
Hob installation: …………….….………56.0 x 49.0 cm
Oven installation: …………...….60.0 x 56.0 x 56.5 cm
Net weight: ………………….…….......………...39.5 kg
Available accessory
Telescopic set: ………...……….Article-No. 8 996 090
The right to make technical and design modifications
during continuous product development remains re-
served.
This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
Disposal
Meaning of the “Dustbin” Symbol
Protect our environment; do not dispose of electrical
equipment in the domestic waste.
Please return any electrical equipment that you will
no longer use to the collection points provided for
their disposal.
This helps avoid the potential effects of incorrect dis-
posal on the environment and human health.
This will contribute to the recycling and other forms of
reutilization of electrical and electronic equipment.
Information concerning where these can be disposed
of can be obtained from your local authority.
WARNING:
Remove or disable any existing snap and bolt locks if
you take the unit out of operation or dispose it.
Information to professional users for disassembly
(acc. VO (EU) No. 66/2014 appendix I, No. 2)
Information for non-destructive disassembly for
maintenance purposes
Hob / Induction hob

A further disassembly for maintenance purposes
by the user is not provided. Do not disassemble
the unit.

For repair and replacement of defective parts,
please contact our customer service.

Accumulators are not included.