BOMANN EHBC 557 IX Instruction Manual Download

Page: 8 / 20

a suitable cord as mains cable, considering the
connection type and nominal power of the oven.

•

Fix the mains cable in the tension relief.

•

Make sure to connect the protective ground to the
terminal of the marked terminal block.

•

The electrical installation of the oven should be
equipped with an emergency switch, which
switches off the whole appliance from the mains
supply in an emergency. The distance between
the contacts of the emergency switch must be at
least 3 mm.

•

Arrange the mains cable in such a way that it
does not get in contact with any hot components
of the appliance. Do not lead it over sharp edges
or corners.

Connecting the hob to

Connecting the hob to the oven

the oven

Insert the plugs at the end of the hob
the appropriate socket of the oven terminal block.

Connection wiring diagram

Connection wiring diagram
Permissible connection methods

Permissible connection methods

CAUTION:

Each connection requires the protective ground of the
mains to be connected to the E

terminal.

NOTE

NOTE::::

L1, L2, L3 = Phase | N = Neutral
E

= Protective ground

220-240V~ 50Hz

380-415V 3N~ 50Hz

H05 VV-F 3G 4mm²

H05 VV-F 5G 1.5mm²

a suitable cord as mains cable, considering the
connection type and nominal power of the oven.
Fix the mains cable in the tension relief.
Make sure to connect the protective ground to the

the marked terminal block.

The electrical installation of the oven should be
equipped with an emergency switch, which
switches off the whole appliance from the mains

distance between

the contacts of the emergency switch must be at

Arrange the mains cable in such a way that it
does not get in contact with any hot components
of the appliance. Do not lead it over sharp edges

at the end of the hob circuit group in

of the oven terminal block.

Each connection requires the protective ground of the

terminal.

415V 3N~ 50Hz

F 5G 1.5mm²

Startup / Operation

Before initial use

•

Clean the oven interior with all therein located
accessories. Follow the instructions that we give
you in the chapter "Cleaning and Maintenance".

•

In order to burn any manufacturing residue, h
the closed oven for approx. 4
Use the heating function [Upper/lower heat
Then switch to the heating function [Grill]
pending on the model) for another

NOTE

NOTE: : : :

The occurring odor and possibly a slight smoke
development cannot be avoided. Therefore e
sure for a good ventilation
heating.

Operation

1111 Level regulator of cooking zones

Level regulator of cooking zones

The temperature setting is set for each cooking zone
separately by using the respective level regulator.

Position of cooking zone

0000  = Off-position
1111  = Lowest setting (keep food warm)
6666  = highest setting (quick heating a

roasting)

2222 Oven function selector switch

Oven function selector switch

The function selector switch is used to set the type of
heating. Rotate the function selector switch until the
icon for the desired type of heating

3333 Oven temperature selector switch

Oven temperature selector switch

The temperature selector switch is used to adjust the
oven temperature. The thermostat allows the te
perature setting from 40°C to 2

Startup / Operation

Clean the oven interior with all therein located
accessories. Follow the instructions that we give
you in the chapter "Cleaning and Maintenance".
In order to burn any manufacturing residue, heat
the closed oven for approx. 40 minutes at 200°C.

function [Upper/lower heating].

Then switch to the heating function [Grill] (de-

for another 20 minutes.

The occurring odor and possibly a slight smoke
development cannot be avoided. Therefore en-
sure for a good ventilation of the room during

Level regulator of cooking zones

set for each cooking zone

respective level regulator.

Position of cooking zone

food warm)

= highest setting (quick heating and cooking,

Oven function selector switch

The function selector switch is used to set the type of