BOMANN EBO 7905 IX, Instruction Manual

Page: 21 / 32

21
Transport and Packaging
Transport the appliance
If possible, transport the appliance in a vertical posi-
tion. Secure the appliance sufficiently and protect it
against weather during transport.
Unpacking the appliance

Remove the appliance from its packaging.

Remove all packaging material, such as foils, filler
and cardboard packaging.
The packaging materials are environmentally
friendly and recyclable. Dispose of packaging ma-
terials that are no longer required in accordance
with the locally applicable regulations.

To prevent hazards, check the appliance for any
transport damage.

In case of damage, do not put the appliance into
operation. Contact your distributor.
NOTE:
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter
“Cleaning and Maintenance” .
Appliance Equipment
Appliance Overview
1 Control panel
2 Lighting
3 Grill grid
4 Standard oven tray
5 Unit door
6 Door handle
Delivery scope
1x standard oven tray 1x grill grid
Incl. connecting cable
220-240 V∼
2x mounting screws
Installation
The built-in oven is designed for installation in stand-
ard kitchen units. It can be installed both in a tall cab-
inet and under a worktop.
WARNING:
The installation and the connection to the main power
may only be performed by an authorized specialist.
CAUTION:

The worktop, the cabinet, veneers, plastic coat-
ings, used adhesives etc. must be sufficient heat-
resistant (min. 100°C).

To ensure a sufficient cooling air supply, no heat
protection strips may be installed.

If there is a drawer below the furnace or it is at-
tached, an intermediate shelf is required.
NOTE: Recommendation!

When installing, ask another person to assist.

Wear protective gloves to avoid injuries at possi-
ble sharp edges.