BOMANN DT 349, Instruction Manual

Page: 19 / 28

19
Electrical connection
Electrical connection Electrical connection
Electrical connection
WA
WA WA
WARNING:
RNING: RNING:
RNING:
•
The installation to the mains supply must conform
to the local standards and regulations.
•
Improper connection may cause to an electric electric electric electric
shock shock shock shock!
•
Do not modify the appliance plug. If the plug does
not fit properly to the outlet, let install a proper
outlet by an authorized specialist.
•
The accessibility of the power plug must be en-
sured to disconnect the appliance from the power
supply in case of emergency.
CAUTION
CAUTION CAUTION
CAUTION::::
In case of disconnection or power failure:
-
Wait for approx. 5 minutes before restarting.
-
Check the operation settings.
•
Ensure that your mains power corresponds with
the specifications of the appliance. The specifica-
tions are printed on the rating label.
•
Connect the mains cable to a properly installed
and earthed wall outlet.
•
If the plug after installation is not accessible, a
corresponding disconnect device must be availa-
ble to meet the relevant safety regulations.
Reverse the Reverse the Reverse the Reverse the door o door o door o door opening pening pening pening
If required, the door openings can be moved from the
right (supplied condition) to the left side.
WARNING: WARNING: WARNING: WARNING:
When replacing the door stops, the appliance must
be disconnected from the power supply.
NOTE NOTE NOTE NOTE::::
•
When installing, ask another person to assist.
•
You possibly need: screw wrench, Phillips screw-
driver as well as a thin-blade screwdriver.
1. Unscrew the bottom hinge, then move the hinge
pin to the opposite side and fasten.
2. Remove the stopper from the hinge hole of fridge
door bottom, keep the screw safely.
3. Take out the spared stopper for left hand and use
the screw of step 2 to fix stopper into the bottom
left hole of fridge door.
4. Unscrew the middle hinge and dismount doors
and put them in safe place aside.
5. Remove the stopper from the bottom hinge hole
of freezer door, keep the screw safely.
6. Dismount hole covers from fridge door and fix
them to the oppsite side.
7. Dismount hole covers from left of cabinet and fix
them to the right side.
8. Take out the spared stopper for left hand and use
the screw of step 5 to fix stopper into the bottom
left hole of freezer door.
9. Unscrew the screws from the back of cover and
keep the screw safely.
10. Dismount the hole covers on top of cover and
unfix screws – keep the screws and covers safely.
11. Dismount the cover from left side of cover and
keep it safely.
12. Dismount the top hinge from the cover, and un-
screw the hinge pin and fix it to the opposite side.