BOMANN DT 349, Instruction Manual

Page: 18 / 28

18
Transport
Transport Transport
Transport and
and and
and Packaging
Packaging Packaging
Packaging
Transport the appliance
Transport the appliance Transport the appliance
Transport the appliance
Transport the appliance, if possible, only in vertical
position. Otherwise, it is absolutely necessary to
allow the appliance standing upright for a few hours
before installation ”Prior to first use”. Protect the ap-
pliance during transport against weather influences.
NOTE
NOTE NOTE
NOTE::::
The appliance has castors which facilitate the
transport and installation of the appliance. Tilt the
appliance back slightly and move it gently.
Unpack the appliance Unpack the appliance Unpack the appliance Unpack the appliance
•
Remove the appliance from its packaging.
•
Remove all packaging material, such as foils, filler
and cardboard packaging.
•
To prevent hazards, check the appliance for any
transport damage.
•
In case of damage, do not put the appliance into
operation. Contact your distributor.
CAUTION: Tra CAUTION: Tra CAUTION: Tra CAUTION: Transport protection! nsport protection! nsport protection! nsport protection!
Pull off the foil from the appliance sides.
NOTE
NOTE NOTE
NOTE::::
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter “Cleaning and Maintenance”.
Appliance Equipment Appliance Equipment Appliance Equipment Appliance Equipment
Appliance ove Appliance ove Appliance ove Appliance overview rview rview rview
1111 Temperature control
2222 Glass shelf
3333 Height-adjustable glass
shelves
4+5
4+5 4+5
4+5 Vegetable box with
glass cover
6+7 6+7 6+7 6+7 Door racks
Delivery scope
Delivery scope Delivery scope
Delivery scope
2 x height-adjustable glass shelf, 1 x vegetable box
with glass cover, 4 x door storage rack, 1 x egg tray,
1 x ice-cube tray
For the reverse of the door opening: 2 x stopper
Installation
Installation Installation
Installation
Condition
Condition Condition
Conditions for the installation location
s for the installation location s for the installation location
s for the installation location
•
Good ventilation is required around the appliance,
in order to dissipate the heat properly and to
guarantee efficient cooling operation at low power
consumption. Sufficient clearance is necessary.
-
Gap to the back and to the side walls each
approx. 5 cm;
-
Place the appliance so that the appliance door
can open without being impeded.
•
Only install at a location with an ambient tempera-
ture suitable for the climate class of the appliance.
For information on the climate class, please refer
to chapter “Technical Data” or to the rating label
located in the interior or on the rear side of the
appliance.
•
Place the appliance on a steady and safe surface.
If the appliance is not horizontally leveled, adjust
the feet accordingly.
•
Avoid the installation: Avoid the installation: Avoid the installation: Avoid the installation:
-
near heaters, next to a stove, direct sunlight or
any other heat sources;
-
at locations with high humidity (e.g. outdoors,
bathroom), as metal parts would be suscepti-
ble to corrosion under such circumstances;
-
near volatile or flammable materials (e.g. gas,
fuel, alcohol, paint, etc.), in rooms which may
have poor air circulation (e.g. garages).
-
Do not expose the appliance any weather.