E
N
G
LI
S
H
ENGLISH
20
Position
The ideal position is a non-slip, fl at surface.
Putting into Service
Electrical Connection
1. Connect the device to a duly installed 230V/50Hz protective
contact socket.
2. Before inserting the plug into the socket. Make sure that the
mains voltage to be used matches that of the device. You
can fi nd this information on the nameplate.
Use
Basic Settings
Set the blower inclination angle before starting the device. You
can adjust the inclination angle by tipping the blower casing with
both hands. Caution! The inclination angle amounts to approx.
15°.
Operating
To select the fan speed use the selector on the front to set one
of the following speeds:
1 = slow, 2 = medium, 3 = fast.
Shift to „0“ to switch off the device.
Blower Direction/Oscillation
You can choose from the two following options:
1. Turn the device carefully with by hand by holding the fan on
the sides and turning it either to the left or to the right until
the limit stop. Warning: do not exceed this limit. The device
must have been switched off before. The setting knob must
be pulled out.
2. Select the automatic swinging direction by pressing in the
knob. The device swings automatically within a range of
60°. This function is active only when the fan is on. To
deactivate the function pull out the setting knob.
Cleaning
•
Always remove the mains plug before cleaning the device
.
•
Do not use a wire brush or any abrasive items
.
•
Do not use any acidic or abrasive detergents
.
WARNING:
• If you need to remove the safety guard: Always switch
the device off and remove the mains plug.
• Under no circumstances should you immerse the
device in water for cleaning purposes. Otherwise this
might result in an electric shock or fi re.
• Clean the outside of the device with a dry cloth without any
additives.
• If the device is very dirty wet a cloth with water and then
wipe the device dry once you have fi nished.
Noise development
The workplace-related emission value is less than 70 dB(A).
Technical Data
Model: .............................................................................. CB 1063
Power supply: ............................................................230 V, 50 Hz
Power consumption: .............................................................. 50 W
Protection class: ..........................................................................
ΙΙ
Net weight: ........................................................................2,85 kg
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!
Meaning of the “Dustbin” Symbol
Protect our environment: do not dispose of electrical equipment
in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on the
environment and human health.
This will contribute to the recycling and other forms of reutilisa-
tion of electrical and electronic equipment.
Information concerning where the equipment can be disposed of
can be obtained from your local authority.
05-CB 1063 Neu.indd 20
05-CB 1063 Neu.indd 20
06.11.2008 9:32:42 Uhr
06.11.2008 9:32:42 Uhr
