![background image](http://html1.mh-extra.com/html/bomann/732021/732021_instruction-manual_2785628023.webp)
23
•
Transfer and fasten the lower door hinge to the
opposite unit side; after you have unscrewed the
hinge pin and inserted it on the other hinge side.
Screw in the feet accordingly.
•
Put the appliance back in the upright position.
Move the blind plugs to the exposed holes of the
middle door hinge.
•
Put on the freezer door and fix it in the intended
position.
•
Rotate the middle door hinge by 180°, move and
fasten it on the opposite unit side.
•
Move the dummy cap on the appliance top into
the opposite exposed holes.
•
Put on the fridge door and fix it in the intended
position.
•
Transfer and fasten the upper door hinge on the
opposite unit side; after you have unscrewed the
hinge pin and inserted it from the other hinge
side.
•
Put on the hinge cover* included in the scope of
delivery.
Check that the doors are aligned vertically and hori-
zontally to ensure proper opening and closing of the
doors.
Startup / Operation
Prior to first use
CAUTION:
After transport, the appliance should be left standing
upright for four hours before connecting to the power
supply. Nonobservance could lead to malfunction of
the cooling system and causes an appliance break-
down.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter
“Cleaning and Maintenance”.
Starting the appliance
•
Connect the appliance to the power supply.
•
Set the operating conditions. See also the follow-
ing sections.
Settings
Position [ 0 ] means that the appliance is in the
switched-off state. Turn the temperature control
clockwise from this position, the appliance switches
on automatically.
The power levels control the different values of the
internal temperature.
Power level
1, 2
lowest level,
warmest internal temperature
3, 4
medium level,
optimal operating temperature
5, 6, 7*
highest level,
coldest internal temperature
*Beware of high setting because the maximum level may
already mean "freezing point".
The freezer temperature is automatically con-
trolled by the power level setting in the fridge.
Basically, the temperature changes depending on the
ambient temperature (place of installation), the fre-
quency of opening the door and the equipment.
For initial operation, first set the lowest possible in-
ternal temperature (= highest power level) until the
appliance has reached the desired operating tem-
perature. It is recommended to reset to a medium
power level afterwards, then you can easily make
any temperature correction.
Recommendation, for optimized food storage and to
avoid food waste, a medium power level is generally
best. A high power level also increases energy con-
sumption.
Summary of Contents for 732021
Page 30: ...30...
Page 31: ...31...
Page 32: ...32 C Bomann GmbH www bomann germany de Made in P R C Stand 10 2022...