Boly Trail Cameras – MG984G/ MG983G
Boly Inc. | User Manual
03/01/2017
5
2.4 Camera Modes
The different modes are accessed by sliding the power
switch to the different positions marked on the camera:
OFF Mode
Turns the camera off. The camera will still consume a
small amount of power while in OFF mode. It is
recommended to remove the batteries if the camera
will not be used for a long period of time.
TEST/SETUP Mode
Customize the camera settings, or play back pictures
and videos the camera has taken on the LCD display.
ON Mode [ Hunting Mode ]
Camera will take pictures or video when motion is
detected and/or at specific time intervals, according
to the programmed settings. After switching the
camera to the ON position, the motion indicator LED
(red) will blink for about 10 seconds and then turn off.
This preset time allows you to adjust the cameras
position if needed, before the camera becomes active.
●
Security Mode(Only for MG983G-30M)
similar to hunting mode, but needs more
power to supply. So it’s suitable for indoor
use and needs to use the power adapter.
Only in security mode you can use the
remote control to easily arm or disarm.
If the power switch is in ON position
and the Security Mode Is ON, you need to press the
left key to enter security mode quickly or wait for
