Boly Trail Cameras – MG984G/ MG983G
Boly Inc. | User Manual
03/01/2017
21
3.6 Load or Remove a Wireless Sensor
We support three customized kinds of 433MHZ sensors,
infrared body sensor, wireless door magnet and wireless
smoke detector that can be set as an alarm sensor of the
camera.
Method to load or remove a wireless sensor:
1. Power on the wireless sensor.
2. Enter the Setup status, press Menu and enter into
the Study Code submenu. Choose a zone, for example
Zone1, press OK button, then trigger the wireless sensor
to check if the sensor is loaded successfully. When it's
successful, there will be a "√” after the zone number.
For example
，
to load a infrared body sensor :
1.
Choose a zone to start study code;
2. Power on and trigger the wireless sensor;
3. When you want to remove the wireless sensor, please
enter the study code menu, press “
◄
” or “
►
” button to
cancel the “√.”
Please note that the wireless sensors just can be used in
Security Mode
. In Hunting Mode, the wireless sensors
will not function.
