Page 6
1.1.2
Further pictograms
1.2
Proper use
WARNING!
In the event of improper use, the drilling-milling machine
• will endanger the staff,
• will endanger the drilling-milling machine and other material property of the operator,
• may affect the proper operation of the drilling-milling machine.
The drilling-milling machine is designed and manufactured to be used for milling and drilling cold
metals or other non-flammable materials that do not constitute a health hazard by using com-
mercial milling and drilling tools.
The drilling-milling machine must only be installed and operated in a dry and well-ventilated
place.
If the drilling-milling machine is used in any way other than described above, modified without
the authorisation of the company or operated with diffe-
rent process data, then the drilling-milling machine is being used improperly.
We do not take any liability for damages caused by improper use.
We would like to stress that any modifications to the construction or technical or technological
modifications that have not been authorised by the company
will also render the guara ntee null and void. It is also part of proper use that
the maximum values for the drilling-milling machine are complied with,
the operating manual is observed,
inspection and maintenance instructions are observed.
Activation forbidden!
Read the operating
manual before the
machine is first used!
Pull the mains plug!
Use protective goggles!
Use protective gloves!
Use protective boots!
Wear a safety suit!
Use ear protection!
Protect the environ-
ment!