Bolton Tools BF20VL, Manual, Page: 37 / 56

Page 37
“Disconnecting and securing the drilling-milling machine“ on page 12
Position a warning sign.
5.1.2 Restarting
Before restarting, run a safety check.
“Safety check“ on page 10
WARNING!
Before starting the drilling-milling machine you have to check that there is no danger for
the staff and the drilling-milling machine is undamaged.
5.2 Inspection and maintenance
The type and extent of wear depends to a large extent on individual usage and service conditi-
ons. For this reason, all the intervals are only valid for the authorised conditions.
Interval Where? What? How?
Start of work,
after each
maintenance
or repair ope-
ration
Drill
ing-Mil
ling
mach
ine
“Safety check“ on page 10
Start of work,
after each
maintenance
or repair ope-
ration
Dove
ta
il sl
ide
w
ays
Lubricate
Lubricate all slideways.
Weekly
Cross t
a
ble
Lubricate
Lubricate all blank steel parts. Use acid-free oil, for
example weapon oil or engine oil.
As required
S
p
ind
le nut
s
Readjust
An increased clearance in the spindles of the crosstable can
be reduced by readjusting the spindle nuts. Refer to spindle
nuts position 66 and 71
The spindle nuts are readjusted by reducing the flank of
screw thread of the spindle nut with an adjusting screw. By
readjusting a smooth running move over the whole toolpath
is to be assured, otherwise the wear by friction between
spindle nut /spindle would increase considerably.