Page 32
4.11
Manual spindle sleeve feed with the spindle sleeve lever
ATTENTION!
The clutch of the fine feed has to be disengaged before the spindle sleeve lever can be
used. Activating the spindle sleeve lever when the fine feed is engaged may damage the
clutch.
Loosen the handle screw (
Fig.4-7: „Fine feed“ on page 30) .
The spindle sleeve lever moves away from the drill-mill head and disengages the clutch of
the fine feed.
4.12
Swivelling the drill-mill head
The drill-mill head may be swivelled to the
right and to the left. Two screwings need
to be loosened.
Fig.4-9: Clamping screws
4.12.1
Shifting the drill-mill head
The column of the drill-mill head can be shifted each to the left or to the right.
Use the option of shifting if you need to swivel the drill-mill head to the left or to the right for wor-
king.
4.13
Assembly of the optional adapter for a high speed motor
CAUTION!
Two persons are needed to disassemble the milling head since the milling head needs to
be held in its position when disassembling the screws.
Remove spindle protection.
Remove the screw and pull the alumi-
nium profile with blinds from the gui-
ding.
Fig.4-10: Spindle protection
Clamping screws
Screw
Aluminium profile