I N S T A L L A T I O N
10
Insert the cable connector into the RJ45 connector on the ANT-2.
Re-attach the antenna to the bottom cover plate with the three screws and affix mounting
bracket to pole or tripod with three clamps.
Fasten the cable to the wall or support about 6-12" below the antenna. Leave a bit of slack
in the cable near the antenna so that there is no strain on the connector from the wire.
If you find the 50' antenna cable provided is not long enough you may purchase a custom
length of cable up to 200' to go from the LD-250 to the ANT-2.
You may also purchase a replacement cable at any computer store selling network
hardware. Any Category 5 or 6 cable up to 200 feet will work. See Appendix C for
information on making your own antenna cable.
