Bolt VX-760C, User Manual

Page: 42 / 52

42
|
42
|
Using Wireless Multi (Stroboscopic) Mode
To cancel slave mode, press and hold the MODE button until the TTL mode indicator appears on the LCD.
Important! When using a single flash, set it to the same group and channel as the master.
When using multiple flash units, select the same group and channel for all units being used in a particular light
position. For example, if you are using three VX-760C units, you might want to set one as a main light on 1A,
set the second as a fill light on 1B, and set the third as a hair light on 1C. With this setup, you have the option
of setting each group to a different slave mode via the master flash. If desired, you can set the main on 1A to
TTL mode, the fill light on 1B as a ratio of 1A, and you may elect to disable the hair light on 1C.
Using Wireless Multi (Stroboscopic) Mode
The VX-760C can be used as a wireless TTL master unit in multi (stroboscopic) mode. In wireless multi mode,
the slaves can have different flash outputs, and the flash frequency and number of flashes will be the same for
the master and slave units.