Bolt VS-570N FOR NIKON, User Manual

Page: 32 / 48

32
|
Setting the Flash Groups
5. Choose the master flash mode. Choose whether to use the VS-570N
as a wireless master in TTL or manual mode. Press the Mode button and
then use the up or down navigation buttons to select TTL or Manual.
6. Set EV or power output for the master flash.
A. In TTL mode, press the Mode button and then use the up or down
navigation buttons to adjust EV from -3.0 to +3.0.
B. In manual mode, press the Mode button and then use the up or
down navigation buttons to set the power output from 1 to 8 (See
Chart on page 30).
Setting the Flash Groups
After configuring the master flash, set the slave flash groups. Just like the master flash, you can turn the group
on, choose TTL or manual, and set EV or power output. Each flash group is set in order from A to C, and all
settings for one group are configured before moving on to the next.
Note: When setting groups on the VS-570N, make sure to set your slave flashes to the corresponding groups.
Be aware of the independent recycling time of each flash to ensure that all flash units are ready to fire.
TTL M
EV+
EV-
6
H
EV+
EV-
5