Bolt VS-570N FOR NIKON, User Manual

Page: 31 / 48

Setting the Master Flash
|
31
Setting the Master Flash
Setting the VS-570N as a wireless master involves pressing the Mode
button to advance from one setting to the next, as well as using the up and
down navigation buttons to adjust or enable the settings.
1. Enable wireless master mode. Make sure the VS-570N is in
TTL mode.
2. Press and hold the Mode button until the wireless master summary
screen appears. For more information on this, refer to Wireless Master
Summary Screen on page 34.
3.
Turn the master flash on or off.
Choose whether you want the
master flash to fire as part of the exposure. Press the Mode button so
only the master flash on/off selector appears onscreen. Use the up or
down navigation buttons to select on or off.
4. Select the wireless channel. Press the Mode button and then use
the up or down navigation buttons to cycle through channels 1–4.
TTL
EV+
EV-
GROUP B GROUP A GROUP C
EV+
EV-
EV+
EV-
3
2
4