Troubleshooting
|
17
Troubleshooting
Problem
Solution
The battery indicator fluctuates
between full and empty when
repeatedly reinstalling the same
batteries.
This is normal and may happen when the batteries are nearly
exhausted. Replace the batteries.
The VM-260 is stuck in the
camera hot shoe.
Make sure that the locking wheel is released.
The VM-260 is turned on, but the
flash tubes won’t fire.
• Make sure that fresh batteries are installed and are in the proper
orientation.
• Make sure the power control unit is securely attached to the camera.
• Make sure that the electrical contact on the foot of the control unit is
not dirty. Clean it and try again.
