Turning On the VM-260 and Firing a Test
|
13
Turning On the VM-260 and Firing a Test
To turn the VM-260 on, press and hold the On/off button until the control panel lights up. To fire a test, press
the Test button.
After firing the flash, the ready indicator will blink to indicate the capacitor is charging. Once it’s recharged,
the indicator will stop blinking.
Automatic power-saving function:
After 2 minutes of inactivity, the VM-260 enters power-saving mode.
Press the Test button to resume use.
After thirty minutes of inactivity, the VM-260 will automatically enter sleep mode to conserve battery life. To
reactivate, press the On/off button. During long periods of inactivity, it is recommended that you use the On/off
button to turn the unit off completely.
