VM-1010 Flash Settings and Controls
|
23
S1/S2 Slave Modes
In the S1/S2 Slave modes, the VM-1010 is set to be optically triggered by an external flash source. The S1 mode
fires on any flash, while the S2 mode ignores the preflash and fires on the second flash. You will set the flash
power manually when using these modes.
1. Press the Set button [ ] to switch to the S1 or S2 mode.
2. Press [ ] or [ ] buttons to increase or decrease the flash output power.
LED Focus Assist/Flash Test
Press the LED Focus Assist/Flash Test [ ] button to fire off a test flash.
Press and hold the LED Focus Assist/Flash Test [ ] button to enable and disable the LED Focus Assist lights.
