28
|
Setting Your VC-310N as a Master Slave
3. When you have highlighted the group you wish set, press the Mode button repeatedly until it shows M
and the output power level.
4. Press the Set button to highlight the selected group's power output value.
5. Use the right and left arrows to adjust the power output value from 1/128 to full power in
1/3-stop increments.
6. Press the Set button to confirm your group settings.
To turn off a slave group, follow these steps:
1. Make sure the flash is in master mode.
2. Press the F1 function button repeatedly to cycle through the different groups (A, B, and C).
3. When you have highlighted the group you wish set, press the Mode button repeatedly until it shows [---]
for the group mode setting.
4. Press the Set button to confirm the settings.
Important!
These settings will be saved when you power the unit off and on.