manualshive.com logo in svg

Bolt VC-310N, User Manual, Page: 20 / 40

Share
Download
Bolt VC-310N User Manual Download Page 20

20 

|

 Repeat (Stroboscopic) Mode

Repeat (Stroboscopic) Mode

•  Multi flash mode
•  Multi power output
•  Time (number of flashes)
•  Flash frequency

The repeat (stroboscopic) mode fires the flash multiple times in quick succession during a single exposure. 
Stroboscopic lighting is often used to illustrate motion—this can create a unique effect in which moving 
objects appear multiple times in the frame. It is also useful when capturing fast-moving objects due to the 
flash pulsating faster than the shutter can open and close.

Important!

 Set your camera’s shutter speed to one second or slower. 

To enable stroboscopic mode, turn on the flash and camera and follow these steps:

1.  Press the Mode button repeatedly until [RPT] appears on the LCD.
2.  Press the Set button to highlight the flash output power level, and adjust with the right and left arrows.

Overview

1.  RPT flash mode
2.  RPT power output
3.  Time (number of flashes)
4.  Function button options
5.  Flash frequency

RPT

Times

Hz

1/128 5T−7Hz

IS0100

F5  6

1

2
3

4

5

Summary of Contents for VC-310N









































Reviews:

No comments