1. Internal Battery Level.
Indicates the power percentage of the internal battery LCD screen will display
“USB Out, if no load, it will turn off for 30s
2. Power Button
Push and hold to turn unit “On” & “Off”
3. DC Output.
Press Power button, connect to the cigar lighter to the charge the car battery
N02 user Interface
-4-
Before using the manual override feature, Make sure the battery clamps are
connected to the correct polarity battery terminals and the clamp connect is
connected to the N02. To use the manual override feature, press and hold
the BOOST button for {3} seconds The Green Boost LED will be green indicating
you have successfully entered into Manual Override and it is ready to jump start
your vehicle. If connected in reverse polarity the RED error LED will illuminate
and the unit will not operate.
Power Button/Light Mode Button
Internal Battery Level
