41
To display information from the third-party device on the OSD, you need to select OSD as the port mode. The camera
receives information from the third-party device through the RS485 serial port, translates the received information, and
then displays it on the OSD.
NOTE:
To enable the camera to correctly translate information received from the third-party device, make sure that the
information sent by the third-party device through the serial port complies with the data format specified by our company.
For more details, contact your dealer.
1.
Click
Setup
>
System
>
Ports & Devices
, and then click the
Serial
Port
tab.
2.
Select
OSD
from the
Port Mode
drop-down list and select
Enable OSD Report
. Then OSD data will be reported to the
management platform.
3.
Click
Save
.
Transparent Channel Configuration
Transparent channel is mainly used to achieve transparent data transmission between two devices.
NOTE:
This function is not supported by some models, please see the actual model
for details.
Make sure that you have set Port Mode to Trans-Channel for your camera.
The actual displayed Web interface may vary with the device model.
1.
Click
Setup
>
System
>
Ports & Devices
, and then click the
Trans-
Channel
tab.
2.
Select
Enable
for
Trans-Channel
.
3.
Enter the destination IP address and port number (IP address and
port number that the transparent channel connects to).
4.
Click
Save
.
Maintenance
