7
Camera Diagrams
Camera
1.
12V DC Power Port
Connect the supplied DC power adaptor and cord.
2.
Reset Button
Reset the image resolution to default setting (1080P59.94).
3.
RS-232 Control Port
The control cable is not included. The RS-232 cable usually is provided by controller.
4.
RS-422 Control Port
Control connector is provided.
5.
HDMI Port
HDMI 1.4
6.
SDI Port
3G-SDI
7.
Power LED Indicator
Turns green when the camera is connected to power outlet. When the power is turned on, it takes about 15
to 30 seconds to display the image after LED turns on.
8.
Built-in Mic
It is not activated on 4K model. ONLY for specific model.
9.
IR Remote Controller Sensors
These are sensors to receive commands from infrared remote controller.
10.
Lens
This is a 20X magnification optical zoom lens.
Remove the lens protection plastic before first use.
11.
Communication LED Indicator
Flashes blue when the camera receives commands from the infrared remote controller or another
controller.
12.
Fix mounting holes
a.
For original wall/ceiling mount bracket
13.
Tripod mounting holes
14.
Bottom DIP Switch
