Bolin Technology BC-9 Series, User Manual, Page: 49 / 57

49
When the STANDBY lamp is blinking
If the camera is moved forcibly, or a finger or other object interferes with camera movement, the camera may
fail to memorize the pan/tilt position.
Press the PAN-TILT RESET button to reset the pan/tilt position.
Zooming
Button (Slow Zoom) [T] - Zoom-IN and [W] - Zoom-OUT slowly
Button (Fast Zoom) [T] - Zoom-IN and [W] - Zoom-OUT quickly
Operating Multiple Cameras with Infrared Remote Controller
1. Set the DIP Switch on the rear panel of the camera to the number of
camera you want to operate to 1, 2 or 3.
(See DIP Switch setting instruction)
2. Press one of the Camera IR ID button on the IR remote controller, the
button will be illuminated, that means the camera that is set to IR ID
Number will respond to the IR controller.
3. Always firstly check if the IR ID is set correctly same as the IR ID set on
the camera when the camera is not responding to the IR controller.
Then, you can operate the camera(s) specified by number. Every time you
operate the camera(s) using the IR remote controller, the Camera IR ID button
pressed in step 2 fleshes.
Adjusting the Camera Focus
Focusing on a Subject
Focusing the camera on a subject automatically
Press the AUTO button.
The camera focuses on the subject at the center of the
screen automatically.
Focusing the camera on a subject manually
After pressing the MANUAL button, press either the FAR
or the NEAR button to have the camera focus on the
subject.
Shooting with Back Lighting
When you shoot a subject with a light source behind it, the
subject becomes dark. In such a case, press the BACK
LIGHT button.
To cancel the function, press the BACK LIGHT button
again.
Note
The BACK LIGHT function is effective if MODE is set to FULL AUTO in the EXPOSURE menu of the camera.