DR-
8000 Video Switching Matrix
-16-
n
Control output connection board
l
Control output connection board installation
Picture 14, Control output connection board installation
a) Put in the control output connection board as picture 14 shows
；
b) Tighten the irremovable screws
；
c) Note: control output connection board is not hot swappable.
l
Notes for Control output connection board
Picture 15, Control output connection board schematic picture
1. system internal video (BNC)
This is matrix special setting menu output BNC jack. It can connect to monitor or loop to matrix
output.
2. RS232 Port
It is a standard serial port for computer to download/upload system data.
3. RJ45 Port (LAN)
This is a standard Ethernet port that connects to hub or switch.
4. RJ45 Port (RS-485)
It is a RS-485 interface for matrix expansion.
4
1
2
3
4
