background image

 

10 

BOLID ONE YEAR LIMITED WARRANTY 

Bolid Company and its divisions and subsidiaries («Seller»), 4 Pionerskaya Str., Korolev 141070, 

Moscow Region, Russia warrants its security equipment (the «product») to be free from defects in 

materials and workmanship for one year from date of original purchase, under normal use and service. 

Seller’s obligation is limited to repairing or replacing, at its option, free of charge for parts or labor, any 

product proven to be defective in materials or workmanship under normal use and service. Seller is not 

responsible for results where the product is used improperly, where it is used for any application it is not 

intended for, used under unacceptable environmental conditions and mishandled or stored under 

improperly. Seller shall have no obligation under this warranty or otherwise if the product is altered or 

improperly repaired or serviced by anyone other than the Seller. In case of defect, contact the security 

professional who installed and maintains your security equipment or the Seller for product repair. 

This one year Limited Warranty is in lieu of all other express warranties, obligations or liabilities. There 

are no express warranties, which extend beyond the face hereof. Any implied warranties, obligations or 

liabilities made by seller in connection with this product, including any implied warranty of merchantability, 

or fitness for a particular purpose or otherwise, are limited in duration to a period of one year from the 

date of original purchase. Any action for breach of any warranty, including but not limited to any implied 

warranty of merchantability, must be brought within 12 months from date of original purchase. In no case 

shall seller be liable to anyone for any consequential or incidental damages for breach of this or any other 

warranty, express or implied, or upon any other basis of liability whatsoever, even if the loss or damage is 

caused by the seller’s own negligence or fault. Some countries do not allow limitation on how long an 

implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above 

limitation or exclusion may not apply to you. 

Seller does not represent that the product may not be compromised or circumvented; that the product will 

prevent any personal injury or property loss by burglary, robbery, fire or otherwise; or that the product will 

in all cases provide adequate warning or protection. Buyer understands that a properly installed and 

maintained alarm may only reduce the risk of a burglary, robbery, fire or other events occurring without 

providing an alarm, but it is not insurance or guarantee that such will not occur or that there will be no 

personal injury or property loss as a result. CONSEQUENTLY, SELLER SHALL HAVE NO LIABILITY 

FOR ANY PERSONAL INJURY, PROPERTY DAMAGE OR OTHER LOSS BASED ON A CLAIM THE 

PRODUCT FAILED TO GIVE WARNING. HOWEVER, IF SELLER IS HELD LIABLE, WHETHER 

DIRECTLY OR INDIRECTLY, FOR ANY LOSS OR DAMAGE ARISING UNDER THIS LIMITED 

WARRANTY OR OTHERWISE, REGARDLESS OF CAUSE OR ORIGIN, SELLER’S MAXIMUM 

LIABILITY SHALL NOT IN ANY CASE EXCEED THE PURCHASE PRICE OF THE PRODUCT, WHICH 

SHALL BE THE COMPLETE AND EXCLUSIVE REMEDY AGAINST SELLER. This warranty gives you 

specific legal rights, and you may also have other rights which vary from country to country. No increase 

or alteration, written or verbal, to this warranty is authorized. 

Summary of Contents for S2000-SP1 ORION ISS











Reviews: