2
S2000-SP1 ver.1.56 INSTALLATION MANUAL rev.0
www.bolid.com
2.3 If the module is to be mounted within unprotected premises, it is recommended to mount it
at a height of minimum 2.2 m above the floor.
Figure 1. Overall and Mounting Dimensions of the Module
3 MOUNTING THE MODULE
3.1 Mounting on a Wall
3.1.1 Please ensure that the wall the
module is to be mounted to is solid, flat,
clean, and dry.
3.1.2 Attach the module to the wall in
accordance with the Variant 1 or Variant 2
below.
3.1.3 Variant 1. Apply the Mounting
Pattern (page 7) to the wall. Drill three
holes (A, B and C or D).
3.1.4 Insert wall plugs to the holes and
screw provided woodscrews to the two
upper holes so that a distance between a
screw head and the wall is about 7 mm.
3.1.5 Remove the module cover as
shown in Figure 2.
3.1.6 Hang the module on the two
screws. Screw the third screw into the
bottom mounting hole and fasten the
module to the wall.
3.1.7 Variant 2. Apply the Mounting
Pattern (page 7) to the wall. Drill three
holes (A, B and C or D)
.
Figure 2. Opening the front cover
3.1.8 Insert wall plugs to the holes.
Push the top end of
the front cover down
by your thumbs
Slide the
cover
forward
Unscrew the
screw fixing the
cover
1
2
3