background image

BOLID ONE YEAR LIMITED WARRANTY 

Bolid Company and its divisions and subsidiaries («Seller»), 4 Pionerskaya Str., Korolev 141070, Moscow Region, Russia warrants its 

security equipment (the «product») to be free from defects in materials and workmanship for one year from date of original purchase, 

under normal use and service. Seller’s obligation is limited to repairing or replacing, at its option, free of charge for parts or labor, any 

product proven to be defective in materials or workmanship under normal use and service. Seller is not responsible for results where 

the  product  is  used  improperly,  where  it  is  used  for  any  application  it  is  not  intended  for,  used  under  unacceptable  environmental 

conditions and mishandled or stored under improperly. Seller shall have no obligation under this warranty or otherwise if the product is 

altered  or  improperly  repaired  or  serviced  by  anyone  other  than  the  Seller.  In  case  of  defect,  contact  the  security  professional  who 

installed and maintains your security equipment or the Seller for product repair. 

This  one  year  Limited  Warranty  is  in  lieu  of  all  other  express  warranties,  obligations  or  liabilities.  There  are  no  express  warranties, 

which extend beyond the face hereof. Any implied warranties, obligations or liabilities made by seller in connection with this product, 

including any implied warranty of merchantability, or fitness for a particular purpose or otherwise, are limited in duration to a period of 

one year from the date of original purchase. Any action for breach of any warranty, including but not limited to any implied warranty of 

merchantability, must be brought within 12 months from date of original purchase. In no case shall seller be liable to anyone for any 

consequential  or  incidental  damages  for  breach  of  this  or  any  other  warranty,  express  or  implied,  or  upon  any  other  basis  of  liability 

whatsoever, even if the loss or damage is caused by the seller’s own negligence or fault. Some countries do not allow limitation on how 

long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion 

may not apply to you. 

Seller does not represent that the product may not be compromised or circumvented; that the product will prevent any personal injury 

or property loss by burglary, robbery, fire or otherwise; or that the product will in all cases provide adequate warning or protection. 

Buyer understands that a properly installed and maintained alarm may only reduce the risk of a burglary, robbery, fire or other events 

occurring without providing an alarm, but it is not insurance or guarantee that such will not occur or that there will be no personal injury 

or property loss as a result. CONSEQUENTLY, SELLER SHALL HAVE NO LIABILITY FOR ANY PERSONAL INJURY, PROPERTY 

DAMAGE OR OTHER LOSS BASED ON A CLAIM THE PRODUCT FAILED TO GIVE WARNING. HOWEVER, IF SELLER IS HELD 

LIABLE, WHETHER DIRECTLY OR INDIRECTLY, FOR ANY LOSS OR DAMAGE ARISING UNDER THIS LIMITED WARRANTY OR 

OTHERWISE, REGARDLESS OF CAUSE OR ORIGIN, SELLER’S MAXIMUM LIABILITY SHALL NOT IN ANY CASE EXCEED THE 

PURCHASE PRICE OF THE PRODUCT, WHICH SHALL BE THE COMPLETE AND EXCLUSIVE REMEDY AGAINST SELLER. This 

warranty gives you specific legal rights, and you may also have other rights which vary from country to country. No increase or 

alteration, written or verbal, to this warranty is authorized. 

Summary of Contents for S2000-IK

Page 1: ...xx protocol SPECIFICATIONS Detection Range 10 m Coverage Pattern Curtain two dimensional Input Voltage from a S2000 KDL 8 10 VDC Current Consumption via the loop of the S2000 KDL 0 5 mA max when indication is off Horizontal Angle of Sight 6 Operating Temperatures 30 to 50 C Humidity 95 at 25 C non condensing Overall Dimensions H x W x D 105 mm 75 mm 56 mm max Weight 0 1 kg max Mounting Height 2 3 ...

Page 2: ...t be assigned to a unique number 1 to 127 within the loop the address which is stored in the S2000 IK rev 04 non volatile memory EEPROM This address provides identifying the detector by the S2000 KDL controller Moreover the monitoring strategy must be defined which will be used by the S2000 KDL controller while processing signals received from the S2000 IK rev 04 Programming the S2000 IK Rev 04 Ad...

Page 3: ...on zone The detector shall issue an alarm after your three or four steps with its LED being flashing Wait until the LED finishes flashing and then continue crossing the detection zone The detector should issue an alarm If nobody is moving within the detection zone no alarms shall be issued WARNING To ensure proper operation walk test the S2000 IK rev 04 annually as described above ENABLING DISABLI...

Page 4: ...tability must be brought within 12 months from date of original purchase In no case shall seller be liable to anyone for any consequential or incidental damages for breach of this or any other warranty express or implied or upon any other basis of liability whatsoever even if the loss or damage is caused by the seller s own negligence or fault Some countries do not allow limitation on how long an ...

Reviews: