background image

                                                                                  

 
 

 

 

Solar Energy Australia  

 

              

 

 

 
Doc No SPN-1601A     Rev0803 

 

 

 

         Page  3 

Bolero Manual 

W

ARRANTY 

– T

ERMS AND 

C

ONDITIONS

 

 

Solar Energy Australia considers reliability of your power system/inverter as absolutely critical.  We would rather avoid any potential 

inconvenience by being proactive. Many external influences can effect the reliability of an inverter, none of which are under the control of 

Solar Energy Australia. For these reasons we request that you register your warranty within 60 days of purchase. Warranties which are not 

registered receive a 6 month warranty.  

 

These terms and conditions do not exclude your rights under the statutory or implied warranty within your state or territory. 

 

Solar Energy Australia warrants this inverter against defects in material or workmanship, for a period of two  (2) years from the date of purchase

 

when in normal use and service. The warranty period will provide a total of two (2) years if a completed warranty card is received within 60 days 

of purchase. No warranty will be provided on units which have not been paid for in full. 

     

This warranty does not extend to products which have been opened, altered or repaired by persons other than those authorised by Solar Energy 

Australia or to products which become defective due to acts of God, fire, sabotage, vandalism, contaminated fluids, negligence or  failure to 

operate, house and maintain the product in accordance with instructions provided in this manual. 

It is extremely important that all installation 

instructions contained within this manual are strictly adhered to.  Failure to do so will void your warranty. 

Units which are to be permanently used within 1km of the coast should have the marine version of our product, this will help to avoid 

corrosion problems which are not covered under the terms of this warranty.   

 

Except for the foregoing expressed warranty, Solar Energy Australia makes no other warranty, expressed or implied, including but not limited to, 

the warranty of merchantability or fitness for a particular purpose. 

    

Solar Energy Australia will repair or replace the defective product in accordance with its best judgement. For service under warranty, the buyer 

must contact Solar Energy Australia to obtain a “Return Materials Advise” (RMA) document and shipping instructions before returning the unit.  

Products returned without prior authorisation may be delayed. The buyer will pay all charges incurred in returning the product to the factory, 

including any charges incurred for the uninstallation or reinstallation of the inverter and / or its system components.   Solar Energy Australia will 

pay return freight charges, if the product is found to be defective, within the terms of this warranty.   Repair or replacement of any unit does not 

extend the original warranty terms in any way. 

 

This warranty does not cover repairs made necessary due to the product coming in contact with dirt, abrasives, moisture, erosion, corrosion, 

varnish or other similar, or failure due to poor quality or poor condition of batteries or other system components, or back feed from another AC 

source. 

 

Suitably qualified personnel 

MUST

 carry out wiring.  Failure to do so cannot justify a warranty claim. 

 

If you have any questions about this warranty please do not hesitate to contact us. 

Summary of Contents for SEAP-12-800













Reviews: