Assembly Instructions : Page 5
Step 10
Glue the 7 thin (4mm) strapping
strips into the engraved recesses in
the body sides.
Step 11
Glue a medium (5mm) strapping strip to a body
end so its outer edge is aligned to the body side.
Ensure the line of rivet heads is away from the
corner. Now glue a large (6mm) strapping strip
on the body side so it overlaps the 5mm strip on
the body end.
Repeat for the other body corner.
Step 12
Locate the door hinges between the
hinge holes on the chassis. Slide the
long steel rod through all 6 holes. Fix
in place with 2 small drops of super
glue on the outer ends of the rod.
Step 13
If you wish to have a working door, fix one of the door latches
with one of the small brass nails provided through the eye into
the tiny locating hole in the corner of the body end. Press the
nail in gently to avoid splitting the top of the side brace.
Alternatively you can simply glue the latch and door in place if
you want the door permanently closed.
Repeat for the other body end.
