User’s Manual
11
Thermal hazards
The following safety precautions must be
observed when operating the UVAHAND
250:
•
Never touch the filter during operation.
Danger
There is an acute danger of fire and burns caused by the high tem-
perature of the filter during operation (up to 200 °C)!
•
Protective clothing (protective gloves, UV
protection goggles) must be worn when
working within the radiation field.
•
There must always be a distance of at
least 1m between the equipment and
flammable objects.
•
If the reflector is temporarily covered with
a screen, leave a gap of 3 to 5 cm be-
tween the screen and the filter to prevent
a build-up of heat.
•
The UV lamp must not be used inside
explosion-protected areas.
Danger
The UV lamp must not be used in explosion-protected areas because
of the high temperature it reaches (1000 °C). There is an acute dan-
ger of explosion!
•
Never lay the lamp unit filter down while
the equipment is switched on.
This would trigger the thermal fuse and
cause damage to temperature-sensitive
and combustible surfaces.
Thermal
hazards
Summary of Contents for UVAHAND 250 BL
Page 1: ...User s Manual...
Page 2: ......
